Bradford White M2TW65T Residential Through-The-Wall Storage Heater

■ Advanced ScreenLok® Technology Flame Arrestor Design—Flame arrestor is designed
to prevent ignition of flammable vapor outside of the water heater.
■ Flammable Vapor Sensor—Electronic sensor prevents burner operation if flammable
vapors are detected. The sensor will also prevent operation if there is ongoing flammable
vapor burn inside the combustion chamber.
■ Maintenance Free—No regular cleaning of air inlet openings or flame arrestor is required
under normal conditions.
■ Sight Window—Offers a view into the combustion chamber to observe the operation
of the pilot and burner.
■ Pedestal Base—Rugged and durable base allows easy transport and positioning, and
provides corrosion resistant contact with floor.
■ Stainless Steel Flue Baffle—Designed to maximize the amount of heat absorbed in the
lower portion of tank. Reduces air movement in the heater during standby periods to
retard heat loss up the flue.
All TTW2 Models Feature:
■ Powerful Blower Motor—Our design has higher torque for greater resistance to outside
winds and the power to eliminate problems with difficult venting situations. This
significantly quieter motor runs cooler for a considerably longer operational life.
■ Spark to Pilot Ignition System—Eliminates the constant burning pilot used on other
water heaters. This device results in savings of pilot gas during standby periods.
(110 VAC required to heater).
■ Electronic Gas Control Valve—The integrated, immersion gas control valve offers more
precise temperature control for higher first hour delivery and also allows water
temperature adjustment without removing the cover. The control is equipped with an LED
to display heater status and aid in diagnostics.
■ Horizontal and Vertical Venting—With 3" or 4" PVC, ABS or CPVC (Maximum equivalent
vent length on reverse side).
■ Vitraglas® Lining—Bradford White water heater tanks are protected from the corrosive
effects of hot water by a ceramic porcelain-like coating. The exclusive high silica ceramic
lining provides a tough interior surface for our water heater tank.
■ Steel Tank—Heavy gauge steel automatically formed, rolled and welded to assure a
continuous seam for glass lining.
■ Side Connections—Side tappings allow easy connection for space heating applications.
■ Protective Magnesium Rod—Provides added protection against corrosion for long
trouble-free service.
■ Factory Installed Hydrojet® 2™ Total Performance System—Cold water inlet sediment
reducing device. Helps prevent sediment build up in tank. Increases first hour delivery of
hot water while minimizing temperature build up at top of tank. (M-2-TW75 has Factory
Installed Hydrojet®).
■ Factory Installed Heat Traps—Design incorporates a flexible disk that reduces heat loss
in piping and eliminates the potential for noise generation.
■ Water Connections—3⁄4" NPT factory installed true dielectric fittings. Extends water
heater life and eases installation.
■ 2" Non-CFC Foam Insulation—Covers the sides and top of tank to save energy by
retarding loss of heat. Also increases jacket rigidity.
■ Brass Drain Valve.
■ T&P Relief Valve Included
■ Design Certified by CSA International (formerly AGA and CGA).